Friday 2 November 2012

FINGER PRINT BASED ATM WITH PASSPORT VERIFICATION : ECE FINAL YEAR PROJECT


FINGER PRINT BASED BANKING SYSTEM         
  The main aim of this project to provide secure banking system, by taking fingerprints as authorized identity at ATM/banks.
             The purpose of the project is to provide a secured and reliable environment to the customers for their banking transactions by providing a unique identity to every user using the FINGER PRINT identification technology.
              Here in this project we are going provide the at most security since it is taking the FINGER PRINTS as the authentication for our account. So whenever we want to access our account first we have to press the finger on the finger print scanner. Scanner is interfaced to the micro controller with the serial interfacing. The micro controller reads the data from the scanner. The micro controller allows those users, who are authorized to operate the account. If any unauthorized user tries to operate the account the micro controller switches on the security alarm. The total information about the account holders is stored in the EEPROM. Keypad is used to enter the password to operate the account or Locker.
                In present days, computer becomes a main part of human beings for storing information. This information is up to some extent is a secured one. For example the details of employees and students etc... The authority person may only change the details. For this protection we are going to provide a PASSWORD for the PCs. This is secure up to some extent only because there may be a chance of revealing the password or sometimes the authorized person may forgot the password. So we have to provide security for PCs with a unique and simple to remember identification. One of such identification is the FINGER PRINT.
                Fingerprint Scanner is a device for computer Security featuring superior performance, accuracy, durability based on unique NITGEN Fingerprint Biometric Technology. Fingerprint Scanner can be plugged into a computer separately with your mouse. Fingerprint Scanner is very safe and convenient device for security.


After selecting the mode of operation, the optical sensor takes the finger print and compares with the previously stored database. If the present finger prints matches with any one of the previously stored data then the controller sends a signal to enable the keypad.
For each key press a low logic value will be present at the concerned pin of the microcontroller and by reading this value the controller will do the further actions as specified in the program. The concerned transaction by the user is loaded in the external memory in this case what we are using is EEPROM of 2K bytes at a particular location in the memory.
All these functions which are performed by the user are simultaneously displayed on the LCD. In case any of the finger print is not matched with the data the Locker system is not opened and the Keypad is not enabled at all by giving the indication in the form of buzzer.

Block diagram
Circuit diagram
CODE:
            If you need the code ,please join the site as member and post your request in comments field.....code will be strictly given to the members of the  site....................

17 comments:

  1. I want code of the Finger print base security system plz help me.mail:isti.ru.cse@gmail.com

    ReplyDelete
  2. hai isti rare,
    please check your mail.the program for this project was send to you....

    ReplyDelete
  3. hi, i am doing my final year project.. bio metric identification in atms.....can u please help.......
    mail me krvigneshcbe@gmail.com

    ReplyDelete
  4. Hello sir,

    Plz send me the C program for your project Fingerprint based security system.

    I am using R303a instead of SM630 fingerprint module. So that what changes to be done with the program, plzzzz help meeee.


    Tittu.thomas.panicker@gmail.com

    ReplyDelete
  5. my email is medoo12006@yahoo.com i need coding to d the project

    ReplyDelete

  6. Hai friends you can download the program for this project from the following link

    Http://www.filesin.com/6d884353934/download.htm

    Hai thomas

    Finger Print module fm3o3o uses rs-232 mode communication but r303a uses usb type. Please do some search about interfacing r303a with microcontroller in Google..

    All the best

    ReplyDelete
  7. hi.. do you mind send me the coding for this project please? this is my email
    zainur_5292@yahoo.com

    ReplyDelete
  8. hai zainurish nour the program for this project was sent to you.check your mail..

    ReplyDelete
  9. hai rashid
    the program was send to you.keep visit us

    ReplyDelete
  10. hi sir i need this project please send me this beautiful project code thank u

    ReplyDelete
  11. my email id is amnamirza901@gmail.com please send me code i really need this thank u

    ReplyDelete
  12. Hi!! got impressed by this application. Can you please send the Microcontroller program for the same to syednoor88@gmail.com

    ReplyDelete
  13. Hi!! Got impressed by this application can you please send us the Microcontroller program for the same to syednoor88@gmail.com

    ReplyDelete
  14. hai syednoor
    the program was send to you.
    thanks and regards
    manisekar

    ReplyDelete
    Replies
    1. send me the program plz,,,,,,,,,i need it before the final defense of my major project within this month

      Delete
  15. i want dis project final codee,,,plz send me on my mail,,,,,,thaparavi546@gmail.com

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...